$139.00
Operate multiple monitors from one signal source. Ideal for burn-in/run-in racks and multiple displays on several monitors. See our burn-in rack combination for a complete set up.
Operate multiple monitors from one signal source. Ideal for burn-in/run-in racks and multiple displays on several monitors. See our burn-in rack combination for a complete set up.
The Video Separator is a signal booster and splitter used to take video input from a single source and direct it to eight video outputs for monitors using analog signals. The signal boost obtained by using the VS-98A allows you to not only split the signal but to extend the distance so that you can send the signal to about 210 feet. This is no mean feat, your average VGA card, over a standard VGA cable, send a clear VGA signal approximately 25 feet. This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.
Bandwidth is the term that is used to describe the signal capacity of these units. In analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a given signal. These units have a bandwidth of 200MHz (which is 150 million cycles per second) and that is 25 times greater than a simple TV signal. This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, and thus you can use the very high resolution setting of 1792 x 1344 in 24 or 32 bit true color mode at a refresh rate of 60Hz.
Features
Specifications
|
Function |
VS-98 |
|
|
Connectors |
Input |
15 pin HDB Male |
|
Output |
8 x 15 pin HDB Female |
|
|
LEDs |
1 Power Indicator |
|
|
VGA Bandwidth (-3db) |
200MHz |
|
|
VGA Res./Vertical Freq. |
1792 x 1344 @ 60 Hz |
|
|
Signal Type |
VGA; SVGA; MultiSync |
|
|
Cable Distance |
65 meters, 210 feet (Max) |
|
|
Switches |
Video Signal Gain Control |
|
|
Power Consumption |
DC 9V 380mA (Max) |
|
|
Housing |
Plastic / Metal |
|
|
Weight |
530g |
|
|
Dimensions (L x W x H) |
130 x 185 x 57 mm |
|
Combine the VGA-Plus monitor tester with the ATEN Video Splitter for a complete, inexpensive setup for a burn-in/run-in rack. Complete set includes one VGA-Plus with AC adapter and one Video Splitter (cables not provided). If you need to drive more than 8 drives add the BIRADD7 for an additional Video Splitter. Each additional splitter adds 7 outputs (one used for daisy chain).
Model No. |
Outputs | Price | |
| BIR4 | 4 | $179 ea. | |
| BIR8 | 8 | $199 ea. | |
| BIRADD7 | Add 7 outputs | $119 ea. | |
