AnaTek Corporation

100 Merrimack Road, P. O. Box 1200, Amherst, NH 03031

603.321.0884, FAX 603.836.4436, email

Atlas IT Network Cable Analyzer

$169.00  

     
The new Peak Atlas IT represents a turning point for network cable testing in terms of speed, size, ease of use and features. While other network cable testers are available, they are usually bulky, offer limited information and take time to interpret. Simply connect one end of your network cable to the Atlas IT and the other end to the Atlas Terminator and press the test button. Within seconds, the display verifies the cable and identifies it as either a Straight Through (PC-Hub type) or a Cross-Over (PC-PC type). Additionally, if it detects any problems such as missing, shorted or wrongly wired connections then these are highlighted clearly on the display. The screen shows you the important information first, pressing the scroll button will allow you to see more details, as and when you want to. If you simply need to know if a cable is good or bad then the information is instantly displayed following the analysis, in plain, unambiguous English. If you are not sure how to wire a certain type of network cable then the Atlas IT can be used as a quick reference guide too. Wiring instructions can be displayed on screen when not testing cables. You’ll never forget to switch the unit off either, the unit will turn off automatically if not used for more than 30 seconds.

• Automatic identification of Straight-Through patch cables
• Automatic identification of Cross-Over cables
• Automatic analysis of above cable types
• Analyses all 8 lines of the cable
• Fault identification and highlighting for the following faults:
• Shorted Lines
• Open lines
• Swapped lines
• Display of cable-making instructions when not testing cables
• Can test plug-plug, plug-socket and socket-socket
• Support for up to 150m (500ft) of cable
• Miniature Atlas Terminator, ideal for use in tight spaces
• Clear and user-friendly scrollable display
• Spare battery and spare Atlas Terminator supplied

Atlas IT Identified Terminators (x8)

$99.00  

Using the new ID Terminators provides all the existing functions of cable type identification and fault detection in addition to cable-run identification. Now you can analyze and identify lots of cables without needing to make lots of trips to swap terminators. Sets of 8 unique ID Terminators (numbers 01 to 08) are currently available, numbers 09 to 27 will become available soon.